激光室内定位的混合式高效点云地图构建方法CSCD

针对机器人在室内定位中存在的点云地图形式单一、存储空间大等问题,提出了一种包含特征地图、通行地图和精简地图的混合形式地图构建方法。构建特征地图时,利用曲率、法线和局部显著性等要素提取环境中的显著特征点。构建通行地图时,首先,采用区域生长分割平面;其次,基于室内曼哈顿假设,利用平面空间关系分割出地平面;最后,根据预设高度构建出2D通行地图,并将3D边缘信息融入到通行地图中。在精简地图中,分别采用主方向权重、随机采样和K均值聚类方法对不同类型体素网格内点云进行精简。实验表明,特征地图可为机器人提供丰富的特征信息。通行地图中地面分割的准确度大于95%,可提供准确的先验通行信息。精简地图有效降低了点云地图的冗余度,在精简比例达到95%时,仍可取得0.8mm的平均模型误差,其精简性能优于传统的随机采样和体素格网方法。     

改进PointNetLK的点云智能配准与位姿图优化方法

针对空间在轨服务任务中的非合作目标相对位姿测量问题,提出一种目标可测部位点云的智能配准方法。首先,通过Straight Through滤波算法对半物理仿真平台采集得到的点云进行目标提取,以消除背景数据等杂乱信息;其次,改进PointNetLK神经网络点云配准算法,将提取后的点云数据作为输入,从而获得初步配准结果,解决非合作目标先验信息缺失导致的无法配准问题;最后,建立基于位姿图的优化模型,以降低配准误差,提高配准精度。实验结果表明,与传统迭代最近点(ICP)算法相比,配准综合误差从6.3598降低到1.7291,精度提高约 72.81% 单次耗时从33.16 s降低到4.2 s,效率提升约87.33%,与当前SM ICP等其他算法相比,也具有一定的优势。     

三维激光成像系统的点云模型真彩色处理方法

三维激光成像系统获得的点云数据精度高并且保有高精度的高程信息,然而特征信息不明显,没有保留全部的点和点的拓扑关系,无法直接判读地面物体;影像数据空间分辨率和精度低,并且缺少高程信息,然而其影像的特征连续,光谱信息丰富.因此,进行点云数据与影像数据融合方法的研究是目前三维激光成像系统研制的前沿性课题.针对点云数据与影像数据融合方法的研究,提出了一种三维激光成像系统点云模型真彩色处理的方法.实验结果显示,采用所提出的方法,不仅能够获得被扫描物体的位置信息和大小信息,而且能够得到被扫描物体的表面纹理细节信息.     

Diversity of Comets: Formation Zones and Dynamical Paths

The past dozen years have produced a new paradigm with regard to the source regions of comets in the early solar system. It is now widely recognized that the likely source of the Jupiter-family short-period comets (those with Tisserand parameters, T > 2 and periods, P, generally < 20 years) is the Kuiper belt in the ecliptic plane beyond Neptune. In contrast, the source of the Halley-type and long-period comets (those with T < 2 and P > 20 years) appears to be the Oort cloud. However, the comets in the Oort cloud almost certainly originated elsewhere, since accretion is very inefficient at such large heliocentric distances. New dynamical studies now suggest that the source of the Oort cloud comets is the entire giant planets region from Jupiter to Neptune, rather than primarily the Uranus-Neptune region, as previously thought. Some fraction of the Oort cloud population may even be asteroidal bodies formed inside the orbit of Jupiter. These comets and asteroids underwent a complex dynamical random walk among the giant planets before they were ejected to distant orbits in the Oort cloud, with possible interesting consequences for their thermal and collisional histories. Observational evidence for diversity in cometary compositions is limited, at best. This revised version was published online in June 2006 with corrections to the Cover Date.     

Stochastic modelling considering ionospheric scintillation effects on GNSS relative and point positioning

Global Navigation Satellite Systems (GNSS), in particular the Global Positioning System (GPS), have been widely used for high accuracy geodetic positioning. The Least Squares functional models related to the GNSS observables have been more extensively studied than the corresponding stochastic models, given that the development of the latter is significantly more complex. As a result, a simplified stochastic model is often used in GNSS positioning, which assumes that all the GNSS observables are statistically independent and of the same quality, i.e. a similar variance is assigned indiscriminately to all of the measurements. However, the definition of the stochastic model may be approached from a more detailed perspective, considering specific effects affecting each observable individually, as for example the effects of ionospheric scintillation. These effects relate to phase and amplitude fluctuations in the satellites signals that occur due to diffraction on electron density irregularities in the ionosphere and are particularly relevant at equatorial and high latitude regions, especially during periods of high solar activity. As a consequence, degraded measurement quality and poorer positioning accuracy may result.     

数控纤维缠绕机芯模处理软件的研究

给出了离散点输入芯模的数学处理过程，从而对任意给定的芯模轮廓曲线有了统一的处理方法，统了一芯模输入，为非测地线缠绕软件的输入芯模“微元化”提供了理论依据，并为后面的缠绕计算奠定了基础。     

结冰风洞中过冷大水滴云雾演化特性数值研究

为明晰结冰风洞中过冷大水滴（SLD）云雾演化特性，发展了基于欧拉法的SLD液滴运动、传热和传质耦合计算方法，针对3 m×2 m结冰风洞主试验段水平收缩构型，分析了SLD云雾沉降收缩特性、动量平衡特性和热平衡特性，探索了液滴变形破碎的影响，评估了构型出口处SLD液滴动量平衡和热平衡状态。研究结果表明：直径超过250 μm的SLD液滴在构型内会发生显著形变，液滴尺寸越大则变形程度越强，尤其在160 m/s工况下，当液滴直径超过750 μm后，SLD液滴甚至会发生破碎；液滴变形破碎效应会增大液滴加速度和液滴温度下降率，促使SLD液滴趋近动量平衡和热平衡状态；SLD云雾（最大液滴直径小于1 000 μm）在构型出口处会出现显著的粒径浓度分层、动量分层和热分层现象，其中直径小于100 μm的小尺寸液滴速度快、温度低且不断凝结，趋于平衡态，但直径超过500 μm的大尺寸SLD液滴速度慢、温度高且不断蒸发，则显著偏离平衡态；增大试验段气流速度尽管会减弱SLD云雾粒径浓度分层程度，但会增强动量分层和热分层程度，尤其在160 m/s工况下，SLD云雾会均匀分布在构型出口中心区域内（-0.75 m < Y < 0.75 m且-0.5 m < Z < 0.5 m），与其平衡态间的最大速度差和温度差将分别超过18 m/s和20℃。     

表面活性剂对煤沥青浸渍性能的影响

研究了表面活性剂对煤沥青浸渍性能的影响.实验结果表明:加入少量的表面活性剂后,煤沥青的软化点、粘度等流变性能都得到较大幅度的改善,而残炭率影响不大.对表面活性剂改性煤沥青的机理进行了比较深入地探讨.     

一种新型恒温—温补晶体振荡器

提出了一种ＯＣＸＯ的恒温控制方法。该方法是利用乙醇的沸点制成换态式恒温箱。这种温度控制方法既可以用作中准确度的ＯＣＸＯ，又可以作为精密双层控温ＯＣＸＯ的外层恒温装置，还可以与简单的温补线路结合，构成高准确度的ＯＴＣＸＯ。